Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Lakewood?
Spring replacement in Lakewood typically costs $180-$340 for one spring. If both springs on your door have failed or are the same age, they’re usually replaced together as a matched pair, which runs about twice that range. The written estimate you get before any work starts sets the final price.
That range covers the common residential sizes we see across Lakewood, from the older single-car doors near Belmar to the wider two-car doors in the neighborhoods up toward Green Mountain. What moves a job to the top or bottom of the range comes down to spring type, how the door is built, and how quickly you want it back to working. Our technicians have up to 15 years of experience with torsion and extension springs, and springs are one of the services we handle most.
Quick answer: expect $180-$340 for a single spring, roughly double for a matched pair, and call (833) 681-3532 for a free estimate. Estimates are free and same-day service is often possible.
Key Takeaways
- One spring runs $180-$340; a matched pair is about double that range.
- Most of the cost is labor and the danger involved, not the spring itself.
- Repairing a failed spring is nearly always cheaper than replacing the door.
- Free estimates and same-day service take the guesswork out of the price.
- Our technicians have up to 15 years of experience and work on the door you already have.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers stack up for a typical spring job. Every figure below is a typical estimated range for the Lakewood market, not a fixed quote. The written estimate is what you pay.
| What’s included | Typical estimated range |
|---|---|
| Single torsion spring replacement (parts + labor) | $180-$340 |
| Matched pair of torsion springs | About double the single-spring range |
| Extension spring pair (older doors) | $180-$340 |
| Cable repair, if a cable is worn or frayed alongside the spring | $130-$250 |
| Roller replacement, if rollers are worn and noisy | $110-$220 |
| Track realignment, if the door is off-track after the spring fails | $120-$240 |
| Full garage door repair (spring plus related fixes) | $150-$600 |
Most spring jobs stay in the single-spring or matched-pair line and don’t need the extras above. But a snapped spring often takes a cable or a roller with it, so it helps to know what those line items cost before the technician arrives. If the door comes off the track when it drops, the track realignment range applies too. You can read more about how we handle a full spring replacement if you want the step-by-step of what the visit involves.
What pushes a job toward the higher end? A heavier or wider door needs a stronger spring, which costs more. A door that’s been run for weeks on a broken spring can wear the opener and the rollers, adding items to the estimate. And if the springs are the original ones from decades ago, the whole assembly may need attention, not just the spring itself.
What Affects Spring Replacement Pricing in Lakewood
- Spring type. Torsion springs (the horizontal ones above the door) and extension springs (the ones that stretch along the sides on older doors) are priced differently. Torsion springs are more common on newer doors and usually cost a bit more to replace because the tension is higher and the setup is more involved.
- Door weight and size. A wide two-car door in a neighborhood like Applewood or Morse Park needs a heavier spring than a single-car door. Heavier springs cost more and take a little more labor to install safely.
- Age and condition of the hardware. Springs don’t fail in isolation. If the cables, rollers, or bearings are worn, the technician will flag it. Addressing those at the same time is usually cheaper than a second visit later, even though it raises the total on that day.
- How long the door has run broken. A door that’s been cycled repeatedly on a snapped spring can bend the track or strain the opener. That turns a simple spring swap into a larger repair. Getting it looked at early keeps the cost near the low end of the range.
- Access and door height. Standard 7-foot doors are straightforward. Taller doors or tight garages take more time, which affects labor.
- Whether it’s a single spring or a pair. Many doors use two springs. If one breaks and both are the same age, replacing the pair is the standard approach, which roughly doubles the spring line item. A technician will explain the tradeoff so you can decide.
One local note: Lakewood’s dry air and big temperature swings between summer and winter put steady stress on metal springs. A spring that’s cycled thousands of times in a garage that goes from hot to cold and back tends to fatigue and snap, often without much warning. That’s part of why spring repair is one of the most common calls we get around Lakewood.
Is a Broken Spring a DIY Job?
No. A garage door spring holds the full weight of the door under high tension. When it’s wound, that tension is stored and can release violently. This is the part of the system where a mistake can cause serious injury, and it’s the reason we don’t walk homeowners through a spring swap over the phone. We handle springs so you don’t have to. If a spring has snapped, keep the door closed and leave it alone until a trained technician takes a look. Call (833) 681-3532 and we’ll set up a time.
How to Save on Spring Replacement
The biggest lever on price is timing. Getting a broken spring fixed promptly keeps the door from straining the opener, the cables, and the track, which is where extra line items come from. Beyond that, a few practical moves help:
- Get a written estimate before work starts. Our estimates are free, and the written number is the price. No surprise add-ons once the technician is on site.
- Ask about replacing the pair. If both springs are the same age and one has failed, replacing them together usually costs less over time than doing them one at a time, since you pay for the visit once.
- Fix the small stuff at the same time. If the technician finds worn rollers or a frayed cable, handling it during the spring visit avoids a separate trip and a second labor charge.
- Keep the door closed while you wait. Running the opener on a broken spring wears it out fast. A dead opener turns a spring job into a spring-plus-opener job.
- Don’t wait for a second spring to break. If one has gone, the other is likely close behind. Booking both at once is simpler and often cheaper than two separate repairs.
We’re a repair-first shop, so the recommendation is diagnosis first, then a plan. If the door and hardware still have life in them, a spring replacement gets you back to normal without a full replacement. When you’re ready, call (833) 681-3532 for a free estimate.
Repair or Replace: Which Makes Sense?
For a broken spring on an otherwise sound door, repair almost always wins on cost. A single spring replacement at $180-$340 or a pair at roughly double that is a fraction of a new door installation, which typically runs $700-$2,200. Replacement starts to make sense when the door itself is failing too: cracked panels, a bent track, or a structure that’s reached the end of its life. Even then, a technician will tell you what’s repairable before suggesting a new door. We work on the door you have, across the major brands including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Same-brand expertise means we diagnose and fix the system you already own rather than steering you toward a swap.
What Happens During a Spring Replacement Visit
Knowing the sequence helps you plan your day. A spring visit usually goes like this:
- Diagnosis. The technician checks the spring, cables, rollers, track, and opener to confirm what failed and whether anything else was affected.
- Written estimate. You get the price before any work begins, including any related items the technician recommends.
- Safe release. The old spring is relieved of tension using the proper tools. This is the step that makes spring work a job for a trained professional.
- Installation. The new spring is matched to the door’s weight, wound to the correct tension, and balanced so the door opens and closes evenly.
- Test and adjust. The door is cycled several times and checked so it runs smoothly and the opener isn’t working harder than it should.
Because we keep garage door parts on hand, most spring jobs don’t require a second visit waiting on an order. That keeps the job to one appointment in most cases. If you want to understand the full range of what we handle, our Lakewood Garage Door Repair Co page is the place to start.
Why Lakewood Homeowners Call Us for Springs
Springs are the most dangerous part of any garage door system, and they’re also the most common failure. That’s why we treat spring repair as a dedicated service rather than a side task. Our technicians have up to 15 years of experience, and we work across the brands Lakewood homeowners actually own, from LiftMaster openers to Clopay and Amarr doors. We’re repair-first by design: the goal is to extend the life of your existing door and hardware before anyone suggests a replacement. Parts on hand, not on order, means fewer return visits. And diagnosis comes first, with the recommendation second, so you always know what you’re paying for and why.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Lakewood?
Spring replacement in Lakewood typically costs $180-$340 for one spring, and a matched pair runs about twice that range. The written estimate sets the final price. Call (833) 681-3532 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing the spring is nearly always cheaper than replacing the door, and in most cases the door itself doesn’t need replacing. A spring job at $180-$340 (single) or roughly double (pair) is a fraction of a new door installation, which typically runs $700-$2,200. A technician will confirm what’s repairable before recommending anything. Call (833) 681-3532 to get a free estimate.
Do I need to replace both springs at once?
Often yes. If both springs are the same age and one has failed, replacing the pair runs about twice the single-spring range, but it’s usually cheaper than two separate visits over time, since you pay for the labor once. A technician will lay out both options so you can decide. Call (833) 681-3532 for a free estimate.
Can you come today for a broken spring?
Same-day service is often possible, so it’s worth calling early. A snapped spring is a hazard, so keep the door closed and don’t run the opener until a technician arrives. Call (833) 681-3532 and we’ll find the soonest available time; estimates are free.
Why did my spring break, and can it be prevented?
Most springs break from fatigue after thousands of open-and-close cycles, and Lakewood’s dry air and temperature swings add stress to the metal over time. There’s no way to prevent a spring from eventually wearing out, but keeping the door balanced and not running it on a broken spring protects the opener and the rest of the hardware. If your door feels heavy or sounds different, call (833) 681-3532 for a free estimate before it fails.
Pricing reflects the Lakewood market as of 2026. Lakewood Garage Door Repair Co offers free estimates – call (833) 681-3532.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Travis Vaughn"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Laura Kowalski"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Jennifer Hayes