Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Parts for Lakewood Homeowners
A door that won’t lift usually isn’t a mystery. A cable has frayed, a roller has flat-spotted, a torsion spring has snapped after years of cycling through freeze-and-thaw. What matters is getting the right part into that specific door instead of waiting a week for someone to order it. We keep a range of replacement parts on hand so a common failure doesn’t turn into a two-visit project.
Our technicians have up to 15 years of experience across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, which means we recognize the wear patterns each brand develops. Repair jobs of this kind often get handled the same day in Lakewood when the part is in stock, and every price is quoted and agreed before we touch the door. Call (833) 681-3532 and we’ll get a technician out to look at what’s actually wrong.
What Our Garage Door Parts Service Includes
We treat parts as their own specialty because a failed component is usually a single weak link in a system that’s otherwise fine. Below are the pieces we replace most, and what each one does.
Torsion Spring
The torsion spring is the coiled steel bar mounted above the door that does the heavy lifting, and when it breaks the door becomes nearly impossible to raise by hand. You’ll know because you hear a loud snap and the door won’t budge. Springs are the most dangerous part of any garage door system, so we handle the winding and tensioning ourselves rather than walking a homeowner through it. A single spring repair in Lakewood typically runs $180 – $340, and if both springs are the same age we’ll tell you whether replacing the pair makes more sense than waiting for the second one to fail.
Extension Spring
Older doors, especially many Wayne Dalton and Craftsman models, use extension springs that stretch along the horizontal tracks instead of twisting above the door. They wear at the hooks and loops first, and a broken one can whip loose without proper safety containment. We inspect the mounting points and replace the spring plus any worn hardware so the new part isn’t stressed by old brackets. If your door has extension springs and you’re hearing pops or seeing gaps in the coils, that’s the moment to call.
Cables & Drums
The lift cables run from the bottom corners up over the drums and work with the springs to balance the door. A frayed cable shows up as a door that lifts crooked or a visible birdcage of broken strands near the drum. Cable work is genuinely hazardous because the cable holds tension even when the door looks down, so this is not a job for a homeowner with a pair of pliers. We replace cables and drums together when the drum shows grooving, which extends the life of both.
Rollers & Hinges
Rollers ride inside the track and hinges connect the door panels, and both wear quietly until the door starts to rumble or squeal. Flat-spotted steel rollers and stretched hinges are the usual source of a door that shudders on the way up. We swap in smooth-rolling replacements and check the hinge leaves for looseness at the same time, since a rattling door is often several small worn parts rather than one big failure.
Weatherstripping
The weatherstripping seals the sides and top of the door against drafts, dust, and the afternoon thunderstorms that roll off the foothills in summer. When it hardens or tears, you get daylight around the frame and a door that lets cold air into the garage all winter. We fit new seals sized to your opening so the door closes snug without binding against the frame.
Bottom Seal
The bottom seal, or astragal, is the rubber strip along the bottom panel that meets the floor. It cracks with age and leaves a gap that lets in water, leaves, and small pests, and it can also trigger a safety sensor if the door doesn’t seat evenly. We replace the seal and check that the door meets the concrete flush across its full width. A worn bottom seal is one of the least expensive fixes on a door and one of the easiest to put off too long.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Parts
We work on the door you have, whatever name is stamped on the opener or the panels. LiftMaster and Chamberlain openers share a lot of internal design, so when one of them stops reversing or the motor runs but the door doesn’t move, we know which gear and logic board to check first. Clopay and Amarr doors each have their own panel profiles and hardware, and we match replacement parts to those profiles so a new section or hinge fits the way the original did.
Genie, Wayne Dalton, Craftsman, and Raynor equipment each wear in their own predictable spots, from Genie’s screw-drive tracks to the extension-spring setups on many older Wayne Dalton doors. That range matters when a homeowner has a mixed system, say a Clopay door paired with a LiftMaster opener, because we can look at both halves without handing you off to a second contractor. Whether you have LiftMaster, Chamberlain, Genie, Clopay, or any other make, we can help.
Signs You Need Garage Door Parts Right Now
A door rarely fails without warning. These are the symptoms that most often mean a part has reached the end of its life.
- The door won’t lift or feels extremely heavy. This almost always points to a broken torsion or extension spring, and forcing the door up by hand can damage the opener or the panels. Stop using the automatic opener and call for a look.
- You heard a loud bang from the garage. That snap is the classic sound of a spring breaking, even if the door still looks normal. The door is now being held by the opener alone, which isn’t built for that load.
- The door lifts crooked or one side sags. A cable has likely jumped a drum or frayed on one side, and the imbalance strains the tracks and hinges. Running it this way grinds down parts that were still fine.
- The door shudders, squeals, or rattles on the way up. Worn rollers and stretched hinges are usually the cause, and the noise is the door telling you the moving parts need replacing. Ignoring it accelerates wear on the opener and tracks.
- You can see daylight or feel a draft around the door. Failed weatherstripping or a cracked bottom seal lets in water, cold air, and pests, and it also makes the garage harder to keep dry. These seals are inexpensive to replace and easy to overlook.
Our Garage Door Parts Process – Step by Step
Diagnosis first, recommendation second. Here’s how a parts call usually goes.
- 1
We ask what the door is doing. Before anyone arrives, we take down the symptom: won’t open, opens crooked, noisy, won’t close all the way. That short conversation often tells us which parts to have ready, which is why having inventory on hand shortens the job.
- 2
We inspect the full system, not just the obvious part. A technician checks the springs, cables, drums, rollers, hinges, and the opener, using a door balance test and a close look at cable condition. A door that seems to need one part often has a second one on the way out.
- 3
We explain what failed and why. You get a plain description of the worn component and how it fits into the rest of the system, along with a written price for the repair. No work starts until you’ve agreed to that number.
- 4
We fit the right replacement part. Springs get matched to the door’s weight, cables and drums get replaced together when wear calls for it, and seals get sized to your opening. Tensioned parts are handled by trained hands only.
- 5
We test the door and the safety systems. The door gets cycled several times, the balance and travel are checked, and the safety reverse is tested before we call it done. You get a door that works and a clear picture of anything worth watching down the road.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Parts Cost in Lakewood?
Parts pricing depends on what failed and how much of the system needs replacing at the same time. A typical single torsion spring repair in Lakewood runs $180 – $340, and since a matched pair is usually replaced together, a pair runs about twice that. Cable repair usually lands between $130 – $250. Roller replacement is typically $110 – $220, and track realignment runs $120 – $240. If the opener is the problem rather than the door hardware, opener repair runs $120 – $320, and a full garage door repair call generally falls in the $150 – $600 range depending on how many parts are involved.
What moves the price: the type and gauge of spring, whether one part or several failed together, the size of the door, and whether the drums or cables show wear alongside the spring. To avoid overpaying, ask for a written estimate that lists each part and the labor before work begins, and be wary of anyone who quotes a full replacement before diagnosing the actual failure. Our estimate is free, and it spells out what’s included: the parts, the labor, and the safety testing at the end. The written estimate sets the final price, so there are no surprises when the job is done. Call (833) 681-3532 for an exact quote on your door.
Garage Door Parts Near Lakewood – Our Service Area
We connect homeowners across Lakewood and the surrounding communities with local professionals who handle garage door parts and repair. That includes Wheat Ridge and Golden to the west and northwest, Columbine, Ken Caryl, and Berkley to the south and north, and Sherrelwood, Welby, and Federal Heights up toward the northern suburbs, plus Superior to the northwest. Response times depend on the day and the job, but common failures like a broken spring are a priority because the door is unusable until it’s fixed. For nearby coverage, see our garage door parts page for Wheat Ridge and our garage door parts page for Golden.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Parts in Lakewood
It covers replacing the individual components that wear out on a door, including torsion and extension springs, cables and drums, rollers and hinges, weatherstripping, and the bottom seal. Rather than replacing the whole door, we diagnose which part failed and fit a replacement that matches your existing hardware. That repair-first approach is built into how we work, and it’s why we keep common parts on hand instead of ordering them. If the door itself is sound, a part replacement is usually the faster and less expensive path.
Most single-part repairs finish in a couple of hours once the technician is on site. A spring or cable replacement takes longer than a roller swap or a new bottom seal because of the tensioning and safety testing involved. When the part is in stock, the whole visit is often wrapped up the same day. If a specialty component has to be ordered, we’ll tell you the timeline upfront so you’re not left guessing.
Typical estimates range from about $110 – $220 for roller replacement up to $180 – $340 for a single torsion spring, with cable repair around $130 – $250 and general repair calls in the $150 – $600 range. The final number depends on which parts failed and whether more than one needs replacing together. You’ll get a written estimate before any work starts, and that written estimate sets the final price. Call (833) 681-3532 for an exact quote, and estimates are free.
Yes, we service LiftMaster and Chamberlain equipment, along with Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Those two opener brands share enough internal design that diagnosing a gear or logic board issue is familiar work. If your door and opener are different makes, we can look at both halves of the system together. Whether you have one of those brands or another make entirely, we can help.
Yes, we handle urgent failures like a snapped spring or a door stuck open, and same-day service is often possible when parts are in stock. A broken spring leaves the door unsafe to operate, so we treat those as priority calls. For the fastest help, call (833) 681-3532 and describe what the door is doing. We’re available during our standard hours, and if a door fails on a Saturday we’re closed that day but can book you for Sunday.
We stand behind the parts we install and the labor behind them, and the warranty terms are explained clearly at the time of the estimate. The written estimate spells out what’s covered so you know before work begins. If something we replaced acts up afterward, call us and we’ll take a look. We’d rather fix it right than have you call someone else.
Clear the floor of the garage so the technician can move around the door and the tracks safely, and clear the driveway in front of the opening. If the door is stuck open or won’t close, leave it as it is rather than forcing it, since a door held only by the opener can drop. Have a rough idea of what the door is doing and when it started, because those details speed up diagnosis. Then all you need to do is be there to let the technician in and review the written estimate.
Schedule Your Garage Door Parts Service in Lakewood Today
A worn part doesn’t get cheaper to fix by waiting, and a door running on a failing spring or cable strains everything around it. Our technicians have up to 15 years of experience, we work on the door you have, and every price is quoted and agreed before any work starts. Call (833) 681-3532 for a free, no-obligation estimate on your garage door parts in Lakewood. For full repair and installation needs, start at Lakewood Garage Door Repair Co.
Written by the team at Lakewood Garage Door Repair Co.