Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Lakewood
If your garage door has stopped opening, is grinding, or hangs crooked, the part that failed is usually a spring, a cable, a drum, or a worn roller, and it can be diagnosed and replaced without touching the rest of the door. We connect Lakewood homeowners with local technicians who work on the door you already have instead of steering you toward a replacement. Lakewood Garage Door Repair Co handles parts supply across the city, from the older subdivisions near the Federal Center to the homes along West Colfax. Call us at (833) 681-3532 and we’ll get a technician out to take a look.
Most of Lakewood was built between the 1950s and the 1980s, so the parts work here is dominated by legacy systems: original torsion springs, chain-drive openers, and wood or hardboard sectional doors that have been opening and closing for decades. That shapes everything about how we approach a job. Diagnosis comes first, the recommendation comes second, and the written estimate sets the final price before any work starts.
Why Lakewood Homeowners Call Lakewood Garage Door Repair Co for Garage Door Parts
Lakewood is a mature inner-ring Denver suburb, and the housing reflects it. Split-levels and ranches with attached garages dominate, many still carrying the door and opener that were installed when the house was new. Local technicians here don’t drop in and swap a whole door by default – they read the spring cycles, check the cable, look at the drum wind, and figure out whether a repair buys you another decade or just another season. That repair-first approach is baked into how we work.
Our technicians have up to 15 years of experience, and they’re comfortable across the multi-brand mix that fills Lakewood garages: Chamberlain and Genie openers, Clopay and Amarr doors, plus the Wayne Dalton and LiftMaster systems common in the area’s newer infill and townhome builds. Because we run a parts operation alongside our repair and garage door parts service, the answer is usually “we have it on hand” rather than “we’ll order it and come back next week.”
Response time to Lakewood is fast and dispatch runs from 7am to 7pm. When a spring lets go and the car is stuck in the garage, that matters more than anything else on the page.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Lakewood
Springs, cables, drums, and rollers are the parts that fail first on any door. Here’s how each one plays out in Lakewood’s older housing stock.
Torsion Spring Repair in Lakewood
Most Lakewood homes built between the 1960s and the 1980s still have their original torsion spring, and those springs are rated for roughly 10,000 to 12,000 cycles. A door that opens twice a day burns through that in about 15 years, which means the original spring’s end-of-life moment is happening in a lot of local garages. When a torsion spring snaps, the door becomes too heavy to lift and the opener strains against it; a typical Lakewood torsion spring replacement runs $180 – $340 for one spring, and a matched pair costs about twice that because they’re usually replaced together.
Extension Spring Repair in Lakewood
Some older Lakewood doors, especially one-piece and early sectional models, use extension springs that run along the overhead track instead of a torsion bar above the door. Those springs stretch and lose tension, and the safety cables that should be there often aren’t on older installs. If you hear a door that slams or runs unevenly, extension spring wear is a common cause.
Cables and Drums in Lakewood
Cables and drums do the lifting work alongside the spring, and on a door that’s been cycling for 30 years they wear at the drum wind and the bottom bracket. Cable repair in Lakewood runs $130 – $250, and it’s worth checking whenever a spring is replaced – a frayed cable is a safety issue, not just a nuisance. This is dangerous work: cables are under high tension and a trained technician should handle them, not a homeowner with a wrench.
Rollers and Hinges in Lakewood
Steel rollers flat-spot and nylon rollers crack, and after decades of freeze-thaw movement the hinges and track take the wear. Roller replacement in Lakewood runs $110 – $220, and it’s often the cheapest fix that quiets a noisy door. If the door is rattling or squealing more than it used to, worn rollers are usually the culprit.
Trusted Brands We Service in Lakewood
We work on the equipment you already own, across eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A Lakewood home with a 20-year-old Chamberlain chain-drive opener gets the same diagnostic treatment as one with a newer LiftMaster belt-drive unit. If a part isn’t something we can source locally, we’ll tell you straight and give you a realistic timeline. Same-brand expertise, neighborhood availability, and no pressure to swap a working system for a different manufacturer’s.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Parts Problems We See in Lakewood Homes
Lakewood’s climate and housing age combine to create a specific set of failure patterns you won’t find in a newer suburb.
- Original torsion springs past their cycle life. Springs on 1960s-80s doors are near or past 10,000 – 12,000 cycles and snap without warning. That’s the single most common spring call we field across the city.
- Aged chain-drive openers stripping gears. A 30-year-old chain-drive opener lifting a heavy wood door puts enormous strain on its gears and motor. When the spring is already weak, the opener becomes the part that fails first, and replacing the opener won’t fix a door that needs spring work.
- Hail-dented steel panels. Front Range hail dents steel garage door faces routinely, and on older 1970s-80s models the replacement panel may be discontinued. Local techs keep a panel-matching book for exactly this reason, especially around the Federal Center and Belmar where that door generation is concentrated.
- West-facing weather seals torn by snow. Wind-driven snow off the foothills forces its way past weather seals on west-facing doors, and the moisture that gets in corrodes the bottom section and hinges over time.
Pricing for Garage Door Parts in Lakewood, CO
Parts pricing in Lakewood reflects the reality of older housing: some jobs are a clean single-part swap, others uncover a worn cable or a misaligned track that needs handling at the same time. A typical garage door parts repair in Lakewood runs between $150 and $600 depending on what’s failed. The estimates below are typical for the local market, and the written estimate you receive sets the final price before any work begins.
| Part / Service | Typical Lakewood Estimate |
|---|---|
| Torsion Spring (one spring) | $180 – $340 |
| Matched pair of torsion springs | About twice the single-spring range |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
You’ll get a free estimate and an upfront price that’s agreed before anyone touches the door. If something changes once the door’s open and we can see the full picture, we tell you before doing the extra work, not after.
We Also Serve Cities Near Lakewood
Our technicians cover Lakewood and the surrounding communities. If you’re just outside the city line in Wheat Ridge, Ken Caryl, Columbine, or Golden, we can get a technician to you. The housing may differ slightly from block to block, but the parts knowledge and the repair-first approach carry over. Call to check the schedule and we’ll set a time.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Lakewood
Repair the springs first, then decide about the door. A wood door from 1972 can often keep working for years with fresh torsion springs, new cables, and balanced hardware, and that repair runs $180 – $340 for one spring. Replace the door only when the panels themselves are rotted, delaminating, or beyond safe repair. A technician can tell you which side of that line you’re on after inspecting the door. Call (833) 681-3532 for a free estimate.
Repeated spring failure usually means the wrong spring was installed for the door’s weight, or a mismatched pair is lifting unevenly. On older Lakewood doors this is common because the original hardware was never matched to a replacement spring, and the remaining spring works harder once its partner fails. We check cycles and door weight and match the pair properly. Call us and we’ll figure out why yours keep failing.
Often yes, but it takes panel matching rather than a simple order. The 1970s-80s steel door models common near the Federal Center and Belmar have had many panels discontinued, so local technicians keep a panel-matching book to find the closest profile and color for hail-dented or faded faces. When a match isn’t available, we’ll tell you straight and walk you through your options. Call for an estimate on your specific door.
If the opener runs but the door barely lifts, or lifts and slams, suspect the spring, not the opener. If the opener hums without moving, clicks repeatedly, or the door reverses on its own, the opener is the more likely culprit. A weak spring makes the opener strain and can burn it out, which is why we diagnose the whole system before recommending anything. Call (833) 681-3532 and we’ll sort out which part is actually failing.
Replace the bottom seal and check the side seals, because wind-driven snow off the foothills will force past a torn or flattened seal and the moisture that gets in corrodes the bottom section and hinges. On a west-facing Lakewood door, that seal takes more abuse than any other door in the house. Weatherstripping is one of the parts jobs we handle directly. Call for a free estimate and we’ll check the seal and the door bottom together.
Whether it’s a snapped torsion spring, a stripped opener gear, or a seal that’s quit on you, the fix starts with someone who knows the door you have. Call Lakewood Garage Door Repair Co at (833) 681-3532 for a free estimate, dispatch from 7am to 7pm, and a written price agreed before any work begins.
Written by the team at Lakewood Garage Door Repair Co.